Soft99 Fusso Coat 12 Months Wax – White

Long-lasting synthetic paint sealant with up to 12 months of hydrophobic protection.

SOFT99 Fusso Coat 12 Months Wax – Light is a high-performance synthetic paint sealant designed specifically for white, light-coloured and lighter-toned vehicle paintwork. It creates a durable protective layer that delivers exceptional water repellency, a smooth finish and deep gloss while helping protect the paint from the harsh conditions encountered during everyday driving.

Unlike a conventional carnauba wax, Fusso Coat is a synthetic paint sealant formulated with durability as its primary focus. SOFT99 states that the coating can provide up to 12 months of water beading and sheeting when correctly applied and maintained. 

The result is a vehicle that is not only highly water-repellent but also easier to maintain, with a smooth, glossy finish and a protective barrier designed to resist environmental contamination.

Key Features

• Up to 12 months of protection – Provides long-lasting water beading and sheeting when correctly applied and maintained.
• Designed for light-coloured paint – The Light version is formulated for white and lighter-coloured vehicles.
• Synthetic paint sealant – Uses synthetic protection technology rather than relying solely on traditional wax.
• Extreme water repellency – Creates a highly hydrophobic surface that encourages water to bead and sheet away.
• Weather resistant – Helps protect paintwork against UV light, oxidation, discolouration, acid rain and water.
• Anti-fouling properties – Helps reduce the adhesion of dirt, salt, bird droppings and traffic grime.
• Deep gloss finish – Produces a smooth, clear and glossy appearance.
• Very smooth surface – Leaves the paintwork feeling exceptionally slick after application.
• Extremely economical – One 200g container can coat up to approximately 40 vehicles, depending on vehicle size and application technique.
• Includes applicator sponge – Ready for hand application straight from the container.
• Made in Japan – Developed by SOFT99 Corporation.

Designed for Light-Coloured Vehicles

SOFT99 Fusso Coat 12 Months Wax is available in different colour-specific formulations. The Light version is intended for white and light-coloured paintwork.

For dark-coloured vehicles, SOFT99 offers a separate Dark version designed specifically for darker paint colours.

Choosing the appropriate version for your vehicle's paint colour helps achieve the intended appearance and performance of the Fusso Coat system.

Up to 12 Months of Hydrophobic Protection

SOFT99 states that Fusso Coat can provide up to 12 months of water beading and sheeting. This makes it particularly appealing to enthusiasts who want long-lasting paint protection without having to repeatedly reapply a traditional wax every few weeks or months.

Water contacting the treated surface forms tight beads and is encouraged to sheet away from the paintwork. This strong hydrophobic behaviour also makes routine washing easier by helping water and loose contamination separate from the surface.

Important: The stated 12-month durability is a maximum/claimed lifespan. Actual longevity will vary according to climate, vehicle use, washing methods, environmental exposure and maintenance.

Strong Water Repellency

Fusso Coat produces a highly hydrophobic protective layer over the paintwork.

Once applied and fully polymerised, water is encouraged to form distinct droplets and sheet away from the surface rather than spreading into a continuous film.

This creates the characteristic tight water beading and rapid water sheeting associated with Fusso Coat and provides an excellent visual indication that the protective layer remains active.

Protection Against Environmental Contamination

Your vehicle's paintwork is constantly exposed to contaminants and environmental conditions that can degrade its appearance over time.

Fusso Coat's protective layer is designed to help defend against:

• UV light
• Oxidation
• Discolouration
• Acid rain
• Water exposure
• Road grime
• Salt
• Bird droppings
• General dirt and contamination

SOFT99 specifically describes Fusso Coat as weather resistant and anti-fouling, helping prevent contaminants from adhering strongly to the paint and making routine cleaning easier.

Anti-Fouling Properties

One of Fusso Coat's practical advantages is its resistance to contamination adhesion.

The treated surface is designed to make it more difficult for contaminants such as dirt, salt, bird droppings and traffic grime to adhere strongly to the paint.

This can make routine washing considerably easier, as loose contamination can be removed more readily during the washing process.

Deep Gloss & Slick Finish

While durability and protection are the primary strengths of Fusso Coat, the product also leaves behind a smooth, glossy and highly reflective finish.

The synthetic sealant creates a clear protective layer that enhances the visual appearance of the paintwork while leaving the surface noticeably slick to the touch.

This combination of gloss, slickness, water repellency and durability is what has made Fusso Coat a popular choice among detailing enthusiasts.

Application Instructions

Correct application is particularly important with Fusso Coat. The product should be applied extremely thinly. Applying too much product can make removal more difficult and may result in uneven residue.

1. Wash the vehicle thoroughly.

   Remove loose dirt and contamination from the vehicle before applying Fusso Coat.

2. Decontaminate the paintwork.

   For best results, thoroughly decontaminate the paint before application. The cleaner and smoother the surface, the better the sealant can contact the paintwork.

3. Ensure the paint is clean and dry.

   Fusso Coat should be applied to properly prepared paintwork.

4. Dampen the supplied applicator.

   Lightly dampen the included application sponge with water.

5. Take a very small amount of Fusso Coat.

   Load only a very thin amount of product onto the applicator sponge.

6. Spread extremely thinly and evenly.

   Apply the sealant evenly across the paintwork using light, controlled movements. A thin, uniform layer is essential for easy removal and consistent results.

7. Work panel by panel.

   SOFT99 recommends applying Fusso Coat one panel at a time – for example, bonnet, door, roof, etc. This is particularly important in warmer weather where the product can dry more quickly.

8. Allow the product to dry.

   Allow approximately 2–3 minutes for the surface to dry.

9. Buff off the residue.

   Using a clean, soft microfibre towel, gently remove the dried residue until the surface is clear and streak-free.

10. Allow the coating to polymerise.

    For best results, do not wash the vehicle for at least 24 hours after application. This allows the Fusso Coat protective layer to polymerise and establish its durability.

Thin Application Is the Key

One of the most important tips when using Fusso Coat is to apply less product, not more.

The product is highly concentrated and extremely economical. A very small amount is sufficient to cover a surprisingly large area.

Applying a thick layer does not provide additional protection and can make the product substantially more difficult to remove. Instead, aim for an extremely thin and even film across the paint.

When applied correctly, the product should be spread very thinly before being allowed to dry.

Work Panel by Panel

SOFT99 recommends working one panel at a time, particularly during warmer weather.

This approach provides better control over drying time and makes the final buffing process significantly easier.

A suitable sequence would be:

1. Bonnet
2. Front guard
3. Front door
4. Rear door
5. Rear guard
6. Roof
7. Tailgate/boot

The exact order is not important – the key is to avoid applying the product over a large area and allowing it to sit for an excessive amount of time before removal.

Allow 24 Hours Before Washing

After the final buff, allow the vehicle to remain undisturbed for at least 24 hours.

SOFT99 recommends avoiding washing during this period to allow the sealant to polymerise and establish its protective properties.

For the best results, keep the vehicle dry and protected from rain or other contamination during the initial curing period wherever practical.

Recommended Preparation

Although Fusso Coat can be applied following a thorough wash and decontamination, the quality of the final result will always depend heavily on the condition of the paint underneath.

Fusso Coat is a protective sealant, not a paint correction product, so any existing scratches, oxidation, swirls or defects should ideally be corrected before application if you want the best possible finish.

How Much Product Is Required?

Fusso Coat is exceptionally economical when applied correctly.

SOFT99 states that the 200g container can coat up to approximately 40 vehicles. Actual coverage will vary depending on vehicle size, paintwork configuration and, most importantly, how thinly the product is applied.

For this reason, avoid the temptation to apply a thick layer. A small amount spread extremely thinly is the correct approach.

Fusso Coat for Daily Drivers

Fusso Coat is particularly well suited to vehicles that are regularly exposed to harsh environmental conditions.

It is an excellent choice for:

• Daily drivers
• Family vehicles
• Commuter vehicles
• Vehicles parked outdoors
• Vehicles exposed to Australian sunlight
• Vehicles regularly exposed to rain
• 4WDs and SUVs
• Weekend vehicles where long-term protection is desired
• Vehicles where a traditional ceramic coating is not required

Maintenance After Application

Once Fusso Coat has fully polymerised, maintain the vehicle using a pH-balanced automotive shampoo and safe washing technique.

Regular maintenance washing helps prevent excessive contamination from accumulating on the surface and allows the hydrophobic properties of the sealant to remain at their best.

Avoid unnecessarily aggressive cleaners or abrasive products unless required for a specific maintenance task, as these can reduce the longevity of protective products.

Important Application Tips

• Use very little product. Thin application is critical.
• Dampen the applicator with water before loading it with Fusso Coat.
• Apply evenly. Avoid heavy or patchy application.
• Work panel by panel.
• Be especially careful in hot weather. Drying times can be reduced significantly.
• Buff with a clean, soft microfibre towel.
• Inspect the panel under good lighting to ensure all residue has been removed.
• Do not wash the vehicle for at least 24 hours.
• Keep the applicator and towels clean.
• Do not apply to hot surfaces or in direct, intense sunlight.

What Makes Fusso Coat Different?

Fusso Coat occupies an interesting position between a conventional wax and a modern coating.

It provides the familiar application method of a traditional hand-applied wax, but its primary purpose is long-term synthetic sealant protection.

For enthusiasts who want extremely strong water repellency and long durability without moving to a professionally installed or DIY ceramic coating, Fusso Coat provides a compelling alternative.

The combination of up to 12 months of protection, strong hydrophobic behaviour, anti-fouling properties, UV/weather resistance, gloss and exceptional product economy makes it one of SOFT99's most distinctive paint protection products.

Frequently Asked Questions

Is Fusso Coat a wax or a sealant?

Fusso Coat is technically a synthetic paint sealant. It is marketed as a wax because it is applied in a similar manner to a traditional paste wax, but its protection is based on synthetic sealant technology.

What colour vehicles should use Fusso Coat Light?

The Light version is intended for white and light-coloured paintwork. SOFT99 also offers a Dark version for darker paint colours.

How long does Fusso Coat last?

SOFT99 states that Fusso Coat provides up to 12 months of beading and sheeting. Actual durability varies depending on environmental exposure, vehicle usage, washing methods and maintenance.

How much Fusso Coat should I apply?

Only a very thin layer is required. Fusso Coat is highly concentrated and applying too much product can make buffing unnecessarily difficult.

How long should I leave Fusso Coat before buffing?

SOFT99 recommends allowing the applied surface to dry for approximately 2–3 minutes before buffing with a clean, soft towel. In hot conditions, monitor the product carefully and work panel by panel.

Can I apply Fusso Coat to the entire car at once?

No. For best results, SOFT99 recommends applying the product panel by panel, particularly during summer or warmer conditions.

When can I wash the vehicle after applying Fusso Coat?

Do not wash the vehicle for at least 24 hours after application. This allows the protective layer time to polymerise.

Does Fusso Coat protect against bird droppings?

Fusso Coat has anti-fouling properties designed to help prevent contaminants such as bird droppings, dirt, salt and traffic grime from adhering strongly to the surface. However, bird droppings should still be removed as soon as possible because they can chemically etch automotive paint even when protected. 

Does Fusso Coat provide UV protection?

Yes. SOFT99 describes Fusso Coat as weather resistant and states that it helps protect against UV light, oxidation, discolouration, acid rain and water. 

Can Fusso Coat be applied over existing wax?

For best durability and bonding, apply Fusso Coat to properly cleaned and decontaminated paintwork rather than over an existing layer of wax. Existing protection should ideally be removed during preparation.

Can I use Fusso Coat on ceramic-coated paint?

Fusso Coat is primarily intended as a standalone paint sealant. If the vehicle already has a ceramic coating, follow the coating manufacturer's recommended maintenance system rather than automatically applying another protection product over it.

Why Choose SOFT99 Fusso Coat 12 Months Wax – Light?

Long-lasting protection, exceptional water repellency and an incredibly slick finish.

SOFT99 Fusso Coat 12 Months Wax – Light is an excellent choice for owners of white and light-coloured vehicles who want the convenience of a hand-applied wax with the extended durability of a synthetic paint sealant.

Its combination of up to 12 months of hydrophobic protection, strong water beading and sheeting, anti-fouling properties, weather resistance, UV protection, deep gloss and extreme product economy makes Fusso Coat an outstanding long-term alternative to conventional waxes.

Correct application is particularly important with Fusso Coat. The product should be applied extremely thinly. Applying too much product can make removal more difficult and may result in uneven residue.

1. 
   Wash the vehicle thoroughly.
   

   Remove loose dirt and contamination from the vehicle before applying Fusso Coat.

   
   



2. 
   Decontaminate the paintwork.
   

   For best results, thoroughly decontaminate the paint before application. The cleaner and smoother the surface, the better the sealant can contact the paintwork.

   
   



3. 
   Ensure the paint is clean and dry.
   

   Fusso Coat should be applied to properly prepared paintwork.

   
   



4. 
   Dampen the supplied applicator.
   

   Lightly dampen the included application sponge with water before loading it with Fusso Coat.

   
   



5. 
   Take a very small amount of Fusso Coat.
   

   Load only a very thin amount of product onto the applicator sponge. If you pick up too much product, use the edge of the container to remove the excess.

   
   



6. 
   Spread extremely thinly and evenly.
   

   Apply the sealant evenly across the paintwork using light, controlled criss-cross movements. A thin, uniform layer is essential for easy removal and consistent results.

   
   



7. 
   Work panel by panel.
   

   Apply Fusso Coat one panel at a time – for example, bonnet, door, roof, etc. This is particularly important in warmer weather where the product can dry more quickly.

   
   



8. 
   Allow the product to bond.
   

   Allow approximately 2–3 minutes for the surface to dry under typical conditions. In cooler conditions, the product may require slightly longer; in warmer conditions, the drying time can be reduced.

   
   



9. 
   Buff off the residue.
   

   Using a clean, dry and soft microfibre towel, gently remove the dried residue until the surface is clear, glossy and streak-free.

   
   



10. 
    Allow the coating to polymerise.
    

    For best results, do not wash the vehicle for at least 24 hours after application. This allows the Fusso Coat protective layer to polymerise and establish its durability.