Menzerna 3-Step Polishing Sampler Kit

$59.99 $70.97
1 x Menzerna Fast Gloss HC400 - 250ml   + $0.00 $70.97
1 x Menzerna Medium Cut Polish 2400 - 250ml   + $0.00 $70.97
1 x Menzerna Super Finish 3500 - 250ml   + $0.00 $70.97
Image NameQty
Menzerna 3-Step Polishing Sampler Kit
Add to Wish List

Delivery Options

SAME DAY Click & Collect from your local store

Rating:
100% of 100
SKU
150084

This is the NEW Menzerna Sampler Kit which features 3 stages of cutting allowing you to experience the full range of Menzerna for a budget friendly price. Menzerna is a premium German made polishing compound, often used by European OEM’s such as BMW and Mercedes. Each Polish provides a different level of cut and gloss allowing you a wide spectrum from removing deeper swirls and heavy oxidisation to a final light swirl removal with a high gloss finish.

The kit comprises of the Professional Menzerna 3-Step Polishing System

1 – Heavy Cut 400 – HC400 This cutting compound has a high cut, it is the strongest in the Menzerna range and is designed for modern ceramic clear coated paints often found on BMW, Mercedes, VW and other Euro vehicles. Menzerna Heavy Cut 400 is made to remove 1500 grit sanding marks, deeper swirls and other moderate paint defects easily. (250ml size)

2 – Medium Cut Polish – MCP2400 This polish has a medium cut combined with a medium gloss factor, and is designed for modern ceramic clear coated paints. Made to remove 2500 grit sanding marks, swirls, light oxidisation and other minor paint defects easily. (250ml size)

3 – Super Finish – SF3500 This finishing polish has a low cut combined with a high gloss finish, can be used as a light one-step process or to restore gloss after a cutting stage. Made to refine paint and eliminate very light swirls and light holograms, leaving behind a glossy finish ready for a premium wax or sealant. (250ml size)

Please note: as with all polishes best results are achieved once the surface has been prepared correctly (washed / clayed etc). Areas should be clean, dry and cool – it is advisable to work undercover or in shade, with good lighting.

Best suited for Dual Action RO or Rotary Polishers such as the DAS6, DT-8 or DT-15 polishers

Official Menzerna Products – Made in Germany

Menzerna compounds are most effective when used with a DA Polisher like the DAS-6, DT-8 or DT-15 and a corresponding cutting/polishing/finishing pad.

Heavy Cut 400 – HC400 is best used with a cutting pad for swirl mark, light scratch or heavy oxidisation removal. We recommend the Mint ROD microfibre or green heavy cutting pad for best results. For softer paints or lighter swirl marks a Mint ROD yellow light cutting pad can be used.

Medium Cut Polish – MCP2400 is best used with a soft polishing pad for light swirl mark removal and restoration of gloss from the cutting stage. We recommend the Mint ROD orange polishing pad or yellow light cutting pad for harder ceramic clear coat paints.

Super Finish – SF3500 is best used with an ultra soft finishing pad for very light swirl mark removal, maximum gloss and fine finishing stage. We recommend the Mint ROD black finishing pad.

As with all Menzerna polishing compounds, less is more. This is best used with 4-5 pea sized drops for coverage of a 2ft x 2ft area.

Pro Tip: If you’re unsure where to start, test a small area with Medium Cut Polish on a polishing pad. Wipe off, and check the finish. If you are happy with the defect removal and gloss, you can continue without needing to complete a cutting stage

Pro Tip: There is no hard and fast rule that a cutting pad needs to be used with Heavy Cut 400. This compound can be used with a softer polishing pad for a slightly deeper cut than Medium Cut Polish but still leave a nice gloss.

Image NameQty
Menzerna Fast Gloss HC400 - 250ml1
Menzerna Medium Cut Polish 2400 - 250ml1
Menzerna Super Finish 3500 - 250ml1
Write Your Own Review
Your Rating

(*) Required Fields