Menzerna Medium Cut Polish 2400 is the ‘medium’ polish is our 3 step Menzerna system. This excellent polish is designed to remove compounding marks, fine scratches and light to medium oxidation. Unlike older style compounds this polish is non-gritty and smooth cutting. Formerly Menzerna PF2500, still the same amazing formula but now called Menzerna Medium Cut Polish 2400. This Menzerna Polish has been designed to remove up to 2500 grit sanding marks, and is suggested for use with Light Cutting or Polishing Pads. Ideally this polish is used after Menzerna Fast Gloss FG400 / FG500 or on cars that have light to medium paint imperfections that need polishing out. This can also be used as a single set for some vehicle paints due to the amazing finishing properties in this formula. The Menzerna OEM range are designed for most paint finishes including solid colour, regular clear coat and CeramiClear (e.g. late model Mercedes, and Porsche). Best results are achieved by using with a rotary or random orbital polisher. All Menzerna polishes have excellent lubricating properties so do not need water to keep them working, simply work the polish by multiple passes to break down abrasive clusters and then wipe away the thin residue with a clean microfibre cloth. For even further depth and definition to the paint, especially on dark colours you can follow on with Menzerna SF3500 (formerly SF4000) Menzerna Polishes do not contain fillers, silicones, waxes or other glazes and are Paint Shop friendly. Cut Factor: 6 Gloss Factor: 8 Factors are based 1 lowest (gloss /cut) to 10 highest (gloss/cut) *Please note:* as with all polishes best results are achieved once the surface has been prepared correctly (washed / clayed etc). Areas should be clean, dry and cool – it is advisable to work undercover or in shade, however with good light. Made in Germany
Menzerna compounds are most effective when used with a DA Polisher like the DAS-6, DT-8 or DT-15 and a corresponding cutting/polishing/finishing pad.
Medium Cut Polish – MCP2400 is best used with a soft polishing pad for light swirl mark removal and restoration of gloss from the cutting stage. We recommend the Mint ROD orange polishing pad or yellow light cutting pad for harder ceramic clear coat paints.
As with all Menzerna polishing compounds, less is more. This is best used with 4-5 pea sized drops for coverage of a 2ft x 2ft area.
Pro Tip: If you’re unsure where to start, test a small area with Medium Cut Polish on a polishing pad. Wipe off, and check the finish. If you are happy with the defect removal and gloss, you can continue without needing to complete a cutting stage