Gyeon Q2M Prep is a must have Surface Cleaner that prepares paint, wheels and glass perfectly before applying a protective product. Before you seal, wax or coat your paint it is important that it is squeaky clean and free from contamination, old waxes and polishes to allow the correct bonding and provide the durability or protection stated.
Product Features and Benefits
- Advanced formula: Uses a blend of effective solvents to remove any remaining residues or oils from the surface, leaving a clean and prepped surface ready for coating.
- Maximizes adhesion: Removes any remaining impurities or oils from the surface to ensure maximum adhesion of the coating or sealant.
- Increases durability: Enhances the durability and longevity of the coating or sealant by ensuring a clean and prepped surface.
- Safe for all surfaces: Does not contain any harsh chemicals that can damage or strip the surface, making it safe to use on all surfaces, including paint, glass, and plastic.
Designed to dissolve old waxes and polishes Gyeon Prep is not simply a degreaser, it lifts oils and residue that can also be left behind after polishing to prepare the paint surface perfectly for the protection stage. The other key benefit of Gyeon Prep is that it creates an anti-static surface, which is very beneficial when you are applying coatings and protection to your car. Can be used on most surfaces prior to coating, such as paint, wheels, chrome, trim etc.
Step 1: Wash the Vehicle
Wash the vehicle thoroughly using a quality car shampoo, such as Gyeon Q2M Bathe or Gyeon Q2M Wetcoat. Rinse the vehicle with water and dry it completely before proceeding to the next step.
Step 2: Spray Gyeon Q2M Prep
Shake the bottle well before use. Spray Gyeon Q2M Prep onto a Gyeon Prep towel or a clean microfiber towel. Apply the product to a small section of the vehicle at a time, working in a circular motion. Do not let the product dry on the surface.
Step 3: Wipe with a Clean Towel
Using a fresh microfiber towel, wipe the section of the vehicle in the same circular motion until all residue is removed. Be sure to work in small sections and avoid letting the product dry on the surface.
Step 4: Move to the Next Section
Repeat the process on the next section of the vehicle until the entire surface has been treated with Gyeon Q2M Prep.