Gyeon Q2M Polish 80mm Pads (2pk)
Gyeon Q2M Polish Pad (145mm) has been created specifically for Dual Action Random Orbital and Forced Rotation Poilshers. Works incredibly well as a medium polish step, or single step with Q2M Polish Compound or Menzerna PF2400 to remove medium to fine paint imperfections, enhance gloss and also remove hologramming.
Product Features and Benefits
- Specially designed for use with Gyeon Q2M Polish
- Perfect size for polishing smaller areas of paintwork
- High-quality foam construction
- Provides a uniform finish
- Easy to attach to your polishing machine
- Leaves little to no residue or dust
- Durable and long-lasting
They are made from high-quality foam that provides a uniform finish and is easy to attach to your polishing machine. These pads are designed to work with Gyeon Q2M Polish, ensuring the best possible results. Leaving little to no residue or dust behind, means that you don't have to spend time cleaning up after polishing your car.
These pads will also run up to 10% cooler on larger stroke Dual Action Polishers, which in turn offer more life and durability to the pads.
Designed to suit a 75mm (3") Backing Plate as found on DAS6, DAS6-Pro, and RUPES Bigfoot LHR75 polishers
Pack Size: 2 Pads
Pad Face Size: 80mm (3.25")
To Fit Backing Plate: 75mm (3")
Step 1: Choose Your Polish
Choose a suitable polishing product for your vehicle's paint type and condition. The Gyeon Q2M Polish Pad works well with a variety of polishes, including Gyeon's own range of polishes.
Step 2: Attach the Pad to a Polisher
Attach the Gyeon Q2M Polish Pad to a suitable polishing machine, such as a rotary or dual-action polisher. Make sure the pad is securely fastened and centered on the machine's backing plate.
Step 3: Apply Polish to the Pad
Apply a small amount of polish onto the Gyeon Q2M Polish Pad. Use a microfiber applicator pad or a similar tool to spread the polish evenly over the pad's surface.
Step 4: Work in Small Sections
Work in small sections, applying moderate pressure to the pad as you move the machine over the paint surface. Start with a lower speed setting and gradually increase as needed. Be careful not to apply too much pressure or work the pad for too long in one spot, as this can damage the paint.
Step 5: Wipe Away Excess Polish
Once you have finished polishing a section, wipe away any excess polish with a clean microfiber towel. Repeat the process on the next section until the entire vehicle is polished to your satisfaction.
Step 6: Clean the Pad
After use, remove the Gyeon Q2M Polish Pad from the polishing machine and clean it with warm water and a mild detergent. Rinse thoroughly and let it air dry before using it again.