Gyeon Q2M Cure 400mL

Gyeon Q2M Cure has been formulated to be the ultimate maintenance product for quartz, glass and ceramic coatings, it has been designed to be used either on wet or dry services after washing your car. This spray sealant will enhance the gloss of the paint/coating, add further hydrophobicity to your existing Gyeon coating, and also leave a super-slick finish on the surface.

Product Features and Benefits

• Provides high levels of gloss and slickness to paintwork
• Contains SiO2 technology for added protection against the elements
• Can be used on all exterior surfaces including paint, glass, and plastics
• Easy to use spray-on formula
• Does not leave streaks or residue
• Can be used as a standalone sealant or as a maintenance product for coatings

It has a high concentration of SiO2 so provides a good ˜booster to coatings or can even be used on uncoated paints for a quick-fix. With regular use Gyeon Cure can also reduce the risk of waterspots or staining forming and etching into the paintwork. A single application of Gyeon Q2M Cure can offer 6-8 weeks of protection along with a good boost of gloss and shine. Please note: Cure is suited for Glass, Quartz and Ceramic coatings only - not suited for regular waxes and polymer sealants.

Efficiency is the one of the key features of all Gyeon products, and Q ²M Cure seems most illustrative of that. One or two sprays should be enough to cover an entire panel as big as a door with protective coating. Low consumption translates into great value for the quality of our quartz-based detailer.

For the first couple of weeks following application, quartz coatings exhibit a insignificant tendency to develop hard water stain deposits. The use of Q ²M Cure immediately after the base coating application will help eliminate that risk entirely. The product is also amazing as a Quick Detailer, removing all potential streaks and residual water. It gives the paint a vivid shine, restoring the œjust after coating appearance.

Before using Gyeon Q2M Cure, make sure that your vehicle is clean and dry. We recommend washing your vehicle with Gyeon Q2M Bathe or a similar car shampoo and drying it thoroughly.

Step 1 - Shake the Bottle

Shake the bottle of Gyeon Q2M Cure well before use to ensure that the product is mixed evenly.

Step 2 - Apply the Product

Apply a small amount of Gyeon Q2M Cure onto a clean microfiber towel. Spread the product onto the paintwork in a circular motion, working on a small section at a time.

Step 3 - Buff the Surface

Using a clean microfiber towel, buff the surface to remove any excess product and create a high-gloss finish.

Step 4 - Repeat the Process

Repeat the process on the rest of the vehicle's paintwork, working on one section at a time. Make sure that you apply the product evenly and avoid overlapping onto areas that have already been treated.

Step 5 - Wait for the Product to Cure

Allow the product to cure for at least 1 hour before exposing the vehicle to water or other environmental factors. During this time, avoid touching the paintwork to prevent introducing new marks or scratches.