Gyeon Q2M Clay Lube is Gyeon’s solution for fast, effective and safe claying of your vehicle. Offering a very slippery and easy to work with formula, Gyeon Clay Lube will effortlessly glide over your paint, glass or gelcoat and pick up contaminants on your Gyeon Clay Bar removing them from the surface.
Product Features and Benefits
- Provides excellent lubrication for clay bars to safely remove contaminants
- Increases the lifespan of clay bars
- Prevents scratching or marring of the vehicle's surface
- Enhances the effectiveness of the cleaning process
- Safe for use on all exterior surfaces, including paint, glass, and trim
Q²M ClayLube has extreme slickness which reduces friction and prevents the clay from ‘grabbing’ and marring the surface, instead the clay will slip over it to reveal smooth paint. Ideally used with Q²M Clay for best results, but it can be used with any clay bars, cloths or discs to lubricate. Q²M ClayLube can be diluted down as far as a 1:10 ratio, which offers great economy, without impacting on its high performance and still allowing good lubrication for the clay to do its job. The lubricant enhances the effectiveness of the cleaning process and prevents scratching or marring of the vehicle's surface. The unique formula increases the lifespan of clay bars, allowing for multiple uses.
Gyeon Q2M Clay Lube is safe for use on all exterior surfaces, including paint, glass, and trim, and provides long-lasting protection that is easy to maintain. Its quick and easy application process means you can achieve a clean, contaminant-free finish in just a few minutes.
Step 1: Prepare the Surface
Wash and dry your vehicle thoroughly before using the Gyeon Q2M Clay Lube. This will help ensure that any loose dirt and debris has been removed from the surface. For best results, use a high-quality car wash soap and a microfiber towel to dry the vehicle.
Step 2: Shake the Bottle
Shake the bottle of Gyeon Q2M Clay Lube well before use to ensure that the formula is well mixed.
Step 3: Apply the Lube
Spray the Gyeon Q2M Clay Lube directly onto the surface you will be working on. Apply a generous amount of lubricant, enough to keep the surface wet while using the clay bar. This will help prevent any scratching or marring of the paint surface.
Step 4: Use the Clay Bar
Take the clay bar and knead it into a flat, circular shape. Gently rub the clay bar over the lubricated surface in a back and forth motion, applying light pressure. The clay bar will pick up and remove any contaminants from the surface. Fold the clay bar over frequently to expose a clean surface and continue until the entire surface has been treated.
Step 5: Wipe Away Residue
After using the clay bar, wipe away any remaining residue or lubricant with a clean microfiber towel. This will reveal a smooth, clean surface free from contaminants.
Step 6: Repeat if Necessary
If necessary, repeat the process on any areas that still have visible contaminants. Be sure to knead and fold the clay bar frequently to expose a clean surface and avoid reintroducing any contaminants back onto the surface.
Step 7: Store the Clay Bar
After use, be sure to store the clay bar in a clean, dry place to prevent it from becoming contaminated. You can reuse the clay bar several times before it needs to be replaced.
