Gyeon Q2 Syncro EVO Light 30ml
SECOND SKIN FOR YOUR PAINT. AN ADVANCED, TWO STAGE CERAMIC PAINT COATING.
A unique coating system designed to provide long-lasting performance, protection and self-cleaning properties.
Product Features and Benefits
- Provides extreme durability and protection for car paint
- Creates a hydrophobic and oleophobic surface that repels water, dirt, and other contaminants
- Enhances the visual appearance of car paint with a glossy finish
- Protects against UV rays, chemicals, and environmental pollutants
- Easy and safe to apply, with long-lasting results
Q² Mohs EVO uses fluoro modified polysilazanes for the first time in the car care industry. Why is that so important? Modifying polysilazanes at the precursory stages bring enormous benefits on all levels: durability, chemical resistance or ease of use. Amazingly easy to apply and wipe off, yet extremely chemical resistant. Slick and smooth, yet very durable. Gloss and extreme hydrophobicity are just value-added.
Q² Syncro EVO is a unique opportunity to apply a specially designed coating system consisting of a sophisticated base coat Q² Mohs EVO and the Q² Skin EVO topcoat, which increases gloss and the durability of the hydrophobic effect massively. The topcoat provides also very strong colour enhancement, easily noticeable on dark coloured paints.
All EVO formulas can be applied outdoors. Ensure stable conditions, never use in direct sunlight and check the weather forecast! The coating should not get wet in the first 12 hours after application
CAPACITY: 30 ML & 30 ML
LIGHTBOX CONTAINS: Q² MOHS EVO / Q² SKIN EVO / Q²M COATING APPLICATOR LIGHT / INSTRUCTION MANUAL / MAINTENANCE BOOKLET MINI / DOOR STICKERS / #GYEONIZED STICKER
Step 1: Prepare the Surface
Before applying Gyeon Q2 Syncro EVO, it's important to make sure that the surface is clean, dry, and free of any contaminants. Use Gyeon Q2M Prep or other suitable surface preparation products to ensure that the surface is ready for application.
Step 2: Apply the Coating
Once the surface is clean and dry, apply a small amount of Gyeon Q2 MOHS EVO to an applicator pad and spread it evenly over the surface. Work in small sections, making sure to overlap each pass to ensure full coverage. Avoid applying too much pressure, as this can cause streaking.
Gyeon Q2 MOHS EVO can be applied as single or double layer. Follow with Gyeon Q2 SKIN EVO as your final layer, with the same procedure.
Step 3: Allow to Cure
After applying the coating, allow it to cure for at least 24 hours in a cool, dry place. Do not expose the surface to water or other contaminants during this time, as this can compromise the coating's durability and protection.
Step 4: Maintain the Coating
To maintain the coating, use Gyeon Q2M Cure or other suitable maintenance products. These products will help to extend the life of the coating and keep the surface looking its best.