GYEON Q2 View & Prep Kit
|Warehouse - For Delivery||Yes||In Stock|
|Sydney - Store Pickup||Yes||In Stock|
|Brisbane - Store Pickup||Yes||In Stock|
|Melbourne - Store Pickup||Yes||In Stock|
|Perth - Store Pickup||Yes||In Stock|
Gyeon Q2 View is a highly advanced quartz-based, rain repellent coating for your exterior glass, it is super-hydrophobic making water shoot off your windscreen or windows as you drive along.
This new glass coating/sealant improves visibility, and thus safety when driving in wet conditions – and bets of all it lasts 12 months on your windscreen and up to 36 months on your side windows – not weeks like many other products!
Gyeon Q2 View has a semi-permanent bond to automotive and marine glass and comes into effect at speeds as low as 50km/h, the airflow over the vehicle causes the water droplets to bead up and simply shoot off the glass surfaces with little or no need for wipers, especially when in heavy rain or on the highway or motorway.
Q2 View Rain Repellent Kit contains 2 products, Q2 Cleanse and Q2 Repel; when used systematically they obtain maximum performance and durability which will result in a fully transparent SiO2 (quartz) based coating on your glass that will repel water, dirt and other contaminants and offer easy cleaning of bugs and other road grim from your glass.
Please Note: this is for external use only.
For best results:
Ensure your glass is clean and dry before application, if particularly contaminated you can clay the glass prior. Shake the Q2 Cleanse well and apply a few drops to an applicator pad. Work into the glass surface well across a small section, to thoroughly cleanse the glass of any contamination. Wipe off any residue with a clean, damp microfibre cloth.
Ensure the glass is dry and shake the Q2 Repel bottle well, take one of the applicator cloths on top of the applicator block and apply a good amount of Repel. Wipe over a small section (about half a windscreen) gently ensuring you pass over all the area at least twice to provide even thick coverage. Wait for 2-5 minutes depending on heat/humidity the coating should haze slightly and dry, then wipe off completely with a good quality microfibre cloth. Repeat for all other sections on your glass until coated. We recommend not getting the coating wet for at least 6 hours to allow it to properly cure.
|GYEON Q2M Prep 500mL||1|
|GYEON Q2 View||1|
Write Your Own Review