Mint ProTools ROD Green Cutting Pad 180mm
The new Mint Protools ROD (Random Orbital Design) Green Cutting Pad is a 180mm foam cutting pad designed to remove heavy to medium surface marks such as swirls, holograms, and marring.
This pad suits all all large throw Random Orbital Dual Action Polishers such as the RUPES Bigfoot LHR21.
All Mint ROD Pads have been designed with tapered finish with a 180mm face and a 145mm velcro back to provide better control, stability and balance while polishing. Combined with a center hole to provide up to 10% cooler running during the polishing & correction process. This offers better heat dispersal to provide longer life and durability for the pads.
For best results, we recommend using this ROD Green Cut Pad in conjunction with a quality correction polishing compound such as Menzerna HC400 or Gyeon Quartz Compound to remove paint defects such as marring, swirls and other imperfections including wet sanding marks up to 2000.
It is recommended to follow with a polishing and finishing pad with lesser polish to ensure you achieve an optimal finish.
Pad Face Size: 180 mm
To Fit Backing Plate: 145mm (6")
Always start with a clean dry pad
Apply a very small amount of quality polish to the pad in a couple of pea-sized drops
Place the pad on the paint before starting the machine.
Work within a small area of about 4-6 pads only at one time. Work the polish completely with several slow passes up/down and left/right direction to ensure the abrasives are diminshed
Wipe off with a good quality clean microfibre cloth (one per product)
For best results we suggest to clean the pads after each panel with an Pad Brush or compressed air to avoid any product build up in the pad, which will affect polishing performance