Mint ProTools DA Microfibre Cutting Pad 6"

Special Price $7.99 Regular Price $14.99
0% of 100
Add Your Review

Delivery or Click & Collect at your local store

Free Shipping Available for Orders over $150. Read More

The Mint ProTools DA Microfibre Cutting Pad 6" is a high-quality pad designed for cutting and heavy defect removal. It is specifically designed for use with dual-action (DA) polishers and offers exceptional cutting power for effective paint correction in car detailing.

Product Features and Benefits:

  • Designed for cutting and heavy defect removal, ensuring efficient paint correction.
  • Compatible with 6" (150mm) backing plates.
  • Constructed with high-quality microfiber material for aggressive cutting action.
  • Removes deep scratches, swirl marks, and oxidation effectively.
  • Provides a uniform and consistent cutting performance for even results.
  • Reduces heat generation during polishing, minimizing the risk of paint damage.
  • Optimal balance between cutting ability and finishing refinement.
  • Easy-to-use hook and loop system for quick pad attachment and removal.

The Mint ProTools DA Microfibre Cutting Pad 6" is an essential tool for professional-grade paint correction in car detailing. This pad is specifically designed for cutting and heavy defect removal, allowing you to tackle deep scratches, swirl marks, and oxidation effectively. Compatible with 6" (150mm) backing plates, this cutting pad is constructed with high-quality microfiber material that provides aggressive cutting action. It efficiently removes imperfections, revealing a smooth and rejuvenated surface.

This Microfibre Pad will work well on moderate and heavy oxidation along with pitted finishes, and will remove wet sanding scratches with ease in combination with Menzerna Fast Gloss FG400 or FG500 and is recommended to use on vehicles with harder paintwork such as ceramics.

This Microfibre Cutting Pad has also been designed high quality European foam centre to ensure even and smooth polishing on all surfaces during the polishing process.

We would always recommend using Mint ProTools Pads with a quality polish or compound, this Microfibre Cutting L15 Pad is designed to work well with higher cutting compounds, and will normally need to be followed with a second or final stage of polishing to achieve maximum results.

This pad suits only RO Poilshers such as the DAS6, DAS6-Pro and L15 Dual Action Random Orbital Polishing Machines and attaches via a 5.5" velcro backing plate.

Step 1: Prepare the Surface

Ensure that the surface you are working on is clean and free from any loose debris. It's recommended to wash and dry the surface before applying the Mint ProTools DA Microfibre Cutting Pad 6".

Step 2: Choose the Appropriate Compound

Select a suitable cutting compound or polish according to the type of surface you are working on. Consult the product manual or seek professional advice to determine the best compound for your specific application.

Step 3: Apply the Compound

Squeeze a small amount of the cutting compound onto the Mint ProTools DA Microfibre Cutting Pad 6". Start with a conservative amount and apply more as needed. Spread the compound evenly across the pad.

Step 4: Prime the Pad

Before starting the machine, prime the pad by dabbing it onto the surface. This helps distribute the compound and ensures even coverage.

Step 5: Set the Speed and Start Polishing

Set the polishing machine to an appropriate speed for the task at hand. Begin with a lower speed and gradually increase if necessary. Place the Mint ProTools DA Microfibre Cutting Pad 6" on the surface and activate the machine.

Step 6: Overlap and Maintain Pressure

Work in small sections and make overlapping passes with the pad. Apply even pressure to the surface, but avoid excessive pressure that may cause damage. Keep the pad flat and parallel to the surface for optimal results.

Step 7: Clean and Inspect the Pad

Periodically clean the Mint ProTools DA Microfibre Cutting Pad 6" by using a pad brush or compressed air to remove any residue. Inspect the pad for wear and tear, and replace if necessary for continued performance.

Step 8: Final Touches

After completing the polishing process, wipe off any remaining compound or residue from the surface using a clean microfibre towel. Inspect the results and repeat the process if further refinement is desired.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Related Products