Menzerna Fast Gloss HC400 1L
Menzerna Heavy Cut Compound FG400 is the ‘cutting’ polish is our 3 step Menzerna system. This NEW formula is designed to quickly remove sanding marks, scratches and oxidation however also retain a high gloss finish. Unlike older style compounds this polish is non-gritty and very smooth. This Menzerna Polish is designed to remove up to 1200 grit sanding marks, and is suggested for use with Cutting or even Wool Pads.
Product Features and Benefits
- Formulated with high-quality abrasive particles for fast and efficient correction of paint defects.
- Removes upto 1200 grit sanding marks and other defects in seconds.
- Produces a high-gloss finish that enhances the color and depth of the paint.
- Does not contain silicones or fillers, which can hide defects and reduce the durability of the finish.
- Easy to apply and remove, with low dusting and minimal splatter.
- Suitable for use on all types of paint, including hard and scratch-resistant clear coats.
- Can be used with rotary or dual-action polishers, as well as by hand.
Menzerna Fast Gloss HC400 is a premium compound designed to deliver exceptional results in a short amount of time. Its advanced formula features high-quality abrasive particles that cut quickly through paint defects such as scratches, swirls, and oxidation, while producing an outstanding high-gloss finish that enhances the color and depth of the paint. This compound is suitable for use on all types of paint, including hard and scratch-resistant clear coats.
Unlike other compounds that contain fillers or silicones that can hide defects and reduce the durability of the finish, Menzerna Fast Gloss HC400 does not contain any of these additives. This ensures that the finish produced is not only beautiful, but also durable and long-lasting.
Menzerna Fast Gloss HC400 is also easy to use, with low dusting and minimal splatter. It can be applied with a rotary or dual-action polisher, as well as by hand, and it is easy to remove once the correction is complete. This makes it an excellent choice for both professional detailers and car enthusiasts who want to achieve exceptional results in a short amount of time.
Menzerna compounds are most effective when used with a DA Polisher like the DAS-6, DT-8 or DT-15 and a corresponding cutting/polishing/finishing pad.
Step 1: Preparation
Before using Menzerna Fast Gloss HC400, it's important to properly prepare the paint surface. Wash the vehicle using soap and water, and dry it thoroughly using a microfiber towel. If necessary, use a clay bar to remove any embedded contaminants from the paint surface.
Step 2: Apply the Polish
By Hand: Apply Menzerna Fast Gloss HC400 to a foam or microfiber applicator pad, using a small amount for each section of the vehicle. Work the polish into the paint using a circular motion, applying moderate pressure. Be sure to cover the entire section, and work in small sections to ensure even coverage.
By Machine: Apply 3-4 10 cent peice sized dollups of product to a microfibre or firm/heavy cutting pad for best results. For softer paints or lighter swirl marks a light cutting pad can be used.
Step 3: Buff the Surface
Using a clean microfiber towel or polishing pad, buff the paint surface in a back-and-forth motion, applying moderate pressure. As you buff the surface, you should begin to see a high-gloss finish emerge. Continue buffing until you achieve the desired finish.
Step 4: Remove Any Residue
Using another clean microfiber towel, wipe away any leftover polish or residue. Be sure to inspect the surface for any remaining imperfections or streaks. If necessary, repeat the process until you achieve the desired level of finish.