Gyeon Q2M Finish Pad 145mm
The new GYEON quartz White Finishing Foam Pad (80mm) has been created specifically for Dual Action Random Orbital and Forced Rotation Poilshers. A specially cut edge eliminates any risk of damage during the polishing & correction process.
Features and Benefits:
- High-quality foam composition ensures a uniform and even application of finishing products
- The unique foam design reduces polish sling and provides a high level of gloss
- Compatible with a range of polishing machines
- Can be used for both dry and wet polishing
- Durable and long-lasting
Q²M Finish Pad has reduced height to eliminate pad drag. The center hole allows precise fitment and reduces temperature in the center part of the pad, they provide a smooth feel whilst maintaining the same even and optimum coverage on the surface during the polishing stage.
This Q2M Finishing Pad works incredibly well to add that final gloss and remove any super fine scratches on your finishing stage of polishing & correction with favourite finishing polish such as GYEON Q2M Primer and Menzerna SF3500. Made with a high quality foam ensuring you have not only results that impress, but durability from a quality pad.
These pads will also run up to 10% cooler on larger stroke Dual Action Polishers, which in turn offer more life and durability to the pads.
Designed to suit a 125mm (5") Backing Plate as found on DAS6, DAS6-Pro, DT15, and RUPES Bigfoot LHR15 polishers
Pad Face Size: 145mm (5.75")
To Fit Backing Plate: 125mm (5")
Step 1: Choose Your compound
Choose a suitable polishing product for your vehicle's paint type and condition. The Gyeon Q2M Finish Pad works well with a variety of compounds, including Gyeon's own range of polishes.
Step 2: Attach the Pad to a Polisher
Attach the Gyeon Q2M Finish Pad to a suitable polishing machine, such as a rotary or dual-action polisher. Make sure the pad is securely fastened and centered on the machine's backing plate.
Step 3: Apply Polish to the Pad
Apply a small amount of polish onto the Gyeon Q2M Finish Pad. Use a microfiber applicator pad or a similar tool to spread the polish evenly over the pad's surface.
Step 4: Work in Small Sections
Work in small sections, applying moderate pressure to the pad as you move the machine over the paint surface. Start with a lower speed setting and gradually increase as needed. Be careful not to apply too much pressure or work the pad for too long in one spot, as this can damage the paint.
Step 5: Wipe Away Excess Compound
Once you have finished polishing a section, wipe away any excess polish with a clean microfiber towel. Repeat the process on the next section until the entire vehicle is polished to your satisfaction.
Step 6: Clean the Pad
After use, remove the Gyeon Q2M Finish Pad from the polishing machine and clean it with warm water and a mild detergent. Rinse thoroughly and let it air dry before using it again.