Gyeon Q2M Compound Plus 120 ml
Gyeon Q²M Compound+ offers more bite than Gyeon Compound and is ideally suited to harder paints including ceramic paints such as found on European makes.
Gyeon Q²M Compound+ is a heavy cutting paste that delivers an improved level of scratch removal and high abrasion with a low level of dust and limited secondary defects. Although it does leave light holograms, they are simple to remove with one pass of Q²M Polish.
Product Features and Benefits
- Advanced formula for fast and effective cutting
- Removes scratches, swirl marks, and other imperfections from paint
- Leaves a high-gloss finish
- Silicone-free and body-shop safe
- Easy to use and clean up
Gyeon Q²M Compound+ delivers increased cutting power without the usual price of enormous defects. The formula is water-based and contains high-quality Japanese abrasives that allow fast and easy removal of harsh defects. No silicone or fillers make the procedure of pre-coating preparation and polish removal much faster and easier.
Gyeon Q²M Compound+ is also silicone-free and body-shop safe, making it a popular choice for professional detailers and body shops. Its easy-to-use formula can be applied by hand or machine, and clean-up is a breeze. Simply wipe off any excess with a microfiber towel and you're done!
Gyeon Q²M Compound+ offers a safe yet effective way to quickly & easily remove 1500 sanding marks, scratches, marring, oxidation and still retain a high gloss finish on most paint types.
This compound delivers excellent results on all paint types and in some instances can be used as a single-step polishes.
The use of Gyeon Q2M Polish after to achieve maximum gloss, depth and clarity from paintwork is recommended 120 ml is enough to complete 2-3 vehicles.
Step 1 - Apply the Compound
Apply a small amount of Gyeon Q2M Compound + onto a foam applicator pad or cutting pad on your dual action or rotary polisher. Spread the compound onto the paintwork in a circular motion, working on a small section at a time.
Step 2 - Work the Compound
Using moderate pressure, work the compound into the paintwork. Continue to work the compound until it starts to break down and becomes transparent.
Step 3 - Wipe off Residue
Using a clean microfiber towel, wipe off any residue left on the paintwork. Make sure that you wipe in a straight line and not in a circular motion to avoid introducing new swirl marks.
Step 4 - Inspect the Finish
Inspect the finish of the paintwork to see if any imperfections are still visible. If needed, repeat the process on the affected area.
Step 5 - Apply Protection
Once you have finished using Gyeon Q2M Compound +, we recommend applying a protective coating to the paintwork, such as Gyeon Q2 CanCoat or Gyeon Q2 Mohs. This will help to protect the paintwork from future damage and maintain the high-gloss finish.