Gyeon Q2 Syncro 50ml
Gyeon Q2 Syncro is the most advanced ceramic coating for enthusiasts and detailing professionals. Sophisticated 2-stage formula delivers great results with minimum effort. Q² Syncro offers incredible slickness and repellency. The Q² Mohs base provides hardness and significant durability. Q² Skin is a thick and flexible topcoat that provides great self-cleaning abilities.
Gyeon Q2 Syncro offers incredible slickness, amazing hydrophobic properties, whilst Q2 Skin is a thick, durable and flexible top coating, offering great self-cleaning abilities offering not only true Ceramic Paint Protection that can be applied in your own home that lasts up to 2 years+ but also provide easy on-going maintenance and care.
We highly recommend that Q2 Syncro is only suitable for advanced enthusiasts who previously have experience with Quartz Ceramic coatings, and professional Detailers.
Ensure your car is clean, dry and free from contamination; so wash thoroughly and dry. Clay your car if required prior and use Gyeon Prep to remove all traces of old wax, polish or oils with a new good quality microfibre cloth.
TIP: Apply Q2 Skin at least 4 hours after the last layer of Q² Mohs. You may spread it on a larger surface than regular coatings. Apply as much of the product as you can - it may look oily, but the wipe off will be pure pleasure. We suggest the Q²M PolishWipe.
Thickness:0,2 - 0,5qm
Durability:>24months / 35K km
For best results: The use of Gyeon Prep Surface Cleaner is a MUST before any Gyeon Coating application
Ensure your car is clean, dry and free from contamination; so wash thoroughly and dry.
Clay your car if required prior and use Gyeon Prep to remove all traces of old wax, polish or oils with a new good quality microfibre cloth. It is highly recommended to use a good surface cleaner such as Gyeon Prep before application of any Gyeon Coating.
Apply as per instructions; using the applicator and suede on a small section at a time, wiping off straight away. Check your work as you go for any smears or residue - we always suggest taking a second microfibre cloth as a final wipedown after you have finished the whole panel.
Allow to cure before moving to the second/final coating, then repaeat a similar process.
Once both products are applied; allow a minimum of 12 hours inside before driving or getting wet. And a full week before washing your car.