Mint ProTools DA Microfibre Cutting Pad 3l25" (80 mm)
The Mint ProTools DA Microfibre Cutting Pad is the most aggressive in the range of 3.25" Mint Pads. It has been designed specifically to suit an Random Orbital Polisher such as the DAS6, DAS6-Pro and RUPES LHR75 RO Polisher and features a centre hole cut out to disperse maximum heat and offer a high cut to to remove medium to heavy surface marks and swirls. This Microfibre Pad will work well on moderate and heavy oxidation along with pitted finishes, and will remove wet sanding scratches with ease in combination with Menzerna Fast Gloss FG400 or FG500 and is recommended to use on vehicles with harder paintwork such as ceramics.
This Microfibre Cutting Pad has also been designed high quality European foam centre to ensure even and smooth polishing on all surfaces during the polishing process.
We would always recommend using Mint ProTools Pads with a quality polish or compound, this 80 mm (3.25") Microfibre Cutting Pad is designed to work well with higher cutting compounds, and will normally need to be followed with a second or final stage of polishing to achieve maximum results.
This pad suits only RO Poilshers such as the DAS6, DAS6-Pro and 75mm Dual Action Random Orbital Polishing Machines and attaches via a 3" velcro backing plate.
For best results we suggest to clean the pads after each panel with an air blower, compressed-air or a soft brush to avoid any matting or product build up in the microfibre pad.